Samsung late on Wednesday said that it had initiated mass production of DDR4 memory chips using its second generation '10 nm-class' fabrication process. The new manufacturing technology shrinks die size of the new DRAM chips and improves their performance as well as energy efficiency. To do that, the process uses new circuit designs featuring air spacers (for the first time in DRAM industry). The new DRAM ICs (integrated circuits) can operate at 3600 Mbit/s per pin data rate (DDR4-3600) at standard DDR4 voltages and have been validated with major CPU manufacturers already.

As it usually happens with Samsung’s major DRAM-related announcements, the news today consists of two parts: the first one is about the new DDR4 IC itself, the second part is about the second generation '10 nm-class' (which Samsung calls '1y' nm) manufacturing technology that will be used for other DRAM products by the company. Both parts are important, but let’s start with the new chip.

Samsung’s new DDR4 chip produced using the company’s 1y nm fabrication process has an 8-gigabit capacity and supports 3600 MT/s data transfer rate at 1.2 V. The new D-die DRAM runs 12.5% faster than its direct predecessor (known as Samsung C-die, rated for 3200 MT/s) and is claimed to be up to 15% more energy efficient as well. In addition, the latest 8Gb DDR4 ICs use a new in-cell data sensing system that offers a more accurate determination of the data stored in each cell and which helps to increase the level of integration (i.e., make cells smaller) and therefore shrink die size.

Samsung says that the new 8Gb DDR4 chips feature an “approximate 30% productivity gain" when compared to similar chips made using the 1x nm manufacturing tech. UPDATE 12/21: Samsung clarified that productivity gain means increase in the number of chips per wafer. Since capacity of Samsung's C-die and D-die is the same, the increase in the number of dies equals the increase in the number of bits per wafer. Therefore, the key takeaway from the announcement is that the 1y nm technology and the new in-cell data sensing system enable Samsung to shrink die size and fit more DRAM dies on a single 300-mm wafer. Meanwhile, the overall 30% productivity gain results in lower per-die costs at the same yield and cycle time (this does not mean that the IC costs are 30% lower though) and increases DRAM bit output.

Samsung does not release exact smallest hhalf-pitchsize of the new DRAMs (the feature size used to give names to DRAM process technologies), so at this point we do not know any details about the new chip’s geometries. Given that we are dealing with a 1y process, it logical to assume that the smallest half pitch size is from 14nm to 16 nm, but this is a speculation at this point. What we do know is that Samsung’s 1y nm process technology continues to use ArF (argon fluoride) immersion lithography tools presumably with quadruple patterning (so no EUV). Meanwhile, to reduce parasitic capacitance, Samsung placed air spacer around its bit lines, which helps to increase DRAM performance.

Speaking of performance, it is noteworthy that Samsung’s C-die DRAMs have not been used by companies like Corsair and G.Skill for their leading-edge memory modules for enthusiasts. Apparently, both companies still use the time-proven Samsung B-die ICs made using 20 nm process technology. It remains to be seen whether the aforementioned manufacturers jump to the new 1y nm 8 Gb DDR4 ICs and when.

Samsung says that the new in-cell data sensing system as well as air spacers will be used to make other types of DRAM, including DDR5, HBM3, LPDDR5, and GDDR6 — meaning that these two elements will be used for years to come. Of course, it will be a while before the first three standards enter commercial production, but GDDR6 with the aforementioned enhancements could be produced in the foreseeable future and using the 1y nm process.

CPU developers (likely Intel, AMD, IBM, Qualcomm, etc.) have already validated the new 8 Gb DDR4-3600 memory chips produced using Samsung’s 2nd generation 10 nm-class process technology. The next step for Samsung is to validate memory modules with PC makers and put these modules into the next-gen systems. It is noteworthy that this time Samsung only displays the new 8 Gb ICs on an SO-DIMM, but not on a desktop-class memory module. It is unknown whether this has something to do with product positioning and/or Samsung's own plans for modules (e.g., laptops are addressed first), but previously Samsung always published pictures of its latest DRAMs both on DIMMs and SO-DIMMs.

Along with the announcement of the new 8 Gb DDR4 DRAM IC, Samsung also said that it would ramp up production of memory (not only DDR4, but also mobile DRAM, etc.) using both of its 10 nm-class fabrication processes to meet “growing demand for DRAM in premium electronic systems worldwide”.

Related Reading

Source: Samsung

Comments Locked


View All Comments

  • trajik78 - Wednesday, December 20, 2017 - link

    Does this mean DDR4 prices will come down sooner than later? I'm sitting on my hands to upgrade because it's crazy expensive at the moment.
  • HStewart - Wednesday, December 20, 2017 - link

    It probably means that for that one can purchase larger amount of memory for cheaper cost.

    It also depends on how they make the DDR memory, if use less chips, it could mean 4G will drop - but not sure if the rate of return will allow 2G
  • ddrіver - Wednesday, December 20, 2017 - link

    It means they will have bigger profit margins. You'd be an idiot to think these guys care about more that their own wallets.
  • HStewart - Wednesday, December 20, 2017 - link

    All I say if you can my DDR stick with less of these chips - the cost of board would come down - but yes it probably means Samsung would make more profit from it. Only thing that helps if there is another physical manufacture to allow completion.
  • svan1971 - Wednesday, December 20, 2017 - link

    ddriver - what charity do you work for? do you get paid or do you work for free? R&D, manufacturing,resources,adveetising,shipping all cost money paying employees cost money to.
  • III-V - Wednesday, December 20, 2017 - link

    He apparently works for Retards Anonymous. He's by far the most ignorant commenter on AT articles.
  • jjj - Wednesday, December 20, 2017 - link

    The execs are in general bound by law to only care about profits, it's their duty to protect the interests of the shareholders and nothing else. That's how our world works and the BS about jobs is something you hear from execs that see the public as stupid and from corrupted politicians.
  • jjj - Wednesday, December 20, 2017 - link

    Not at all, DRAM prices might come down in 2019 but unlikely to drop significantly in 2018.

    Prices are not determined by cost, they are a factor of supply vs demand. If Samsung gets to 80% margins on the DRAM side, they'll be happy to take it.
    Micron reported results yesterday and they had 62% margins for DRAM ( they got higher costs than Samsung) and 62% margins are Intel like so stupid high.
    In 2019, enough capacity comes online for prices to drop quite a bit but remains to be seen how hard, wouldn't expect anything close to summer 2016 prices.
  • Beaver M. - Thursday, December 21, 2017 - link

    Make that supply, demand and competition.
    If there is no competition, prices will rise, no matter how high the supply is. And right now the memory market looks like the HDD market. There is not much competition because they have been swallowed by the bigger companies. Its also very likely they are fixing the prices, just like in the HDD sector.
  • jjj - Wednesday, December 20, 2017 - link

    Just to add something. Ofc the most advanced node will focus on areas where it can add more value (and make more money) so high end phones or server where folks pay a premium for lower power and higher density.

Log in

Don't have an account? Sign up now