OCZ Introduces Z-Drive 6000 Enterprise PCIe SSD Series with NVMe Supportby Kristian Vättö on May 20, 2015 8:10 AM EST
- Posted in
- Enterprise SSDs
- Z-Drive 6000
Back at CES OCZ teased us by showcasing the Z-Drive 6000, but the drive was still under development, so the details were rather scarce. Today OCZ is finally lifting the curtain and making a formal announcement of the Z-Drive 6000 series, the company's first NVMe compliant SSD.
We've talked about NVMe in the past, but in short it's a software/driver stack that replaces the ancient AHCI. NVMe has been designed for SSDs from the ground up and its main benefits are scalability (up to 64,000 outstanding commands versus 32 in AHCI) and streamlined software stack that reduces both latency and CPU overhead for higher and more efficient performance. The Z-Drive 6000 series supports the native Windows (8.1 & Server 2012 R2), Linux, UNIX, Solaris, and VMware NVMe drivers, although OCZ will also have custom NVMe drivers for Windows, Linux, and VMware for drive management reasons. The current native drivers lack some necessary management features (e.g. I still haven't found a way to secure erase an NVMe drive with the in-box drivers), so in order to have the features available at launch OCZ is offering a custom driver. That said, OCZ is fully invested in improving the native open source drivers, but the problem is the long turnaround time for updates that has created the need for vendor-specific drivers.
|OCZ Z-Drive 6000 Series Specifications|
|Capacities||800GB; 1,600GB & 3,200GB|
|Form Factors||2.5" 15mm (SFF-8639)||2.5" 15mm & HHHL AIC|
|Interface||PCIe 3.0 x4 (NVMe 1.1b)|
|NAND||Toshiba A19nm 128Gbit MLC||Toshiba A19nm 128Gbit eMLC|
|Endurance||1 DWPD||3 DWPD|
|Power Loss Protection||Yes||Yes|
The Z-Drive 6000 series comes in two flavors: 6000 and 6300. The underlying controller and firmware architectures are the same in both models and the difference lies merely in NAND: the 6300 uses more durable eMLC NAND, which increases the endurance to three drive writes per day from one in the 6000 with normal MLC. Due to the endurance, the 6000 is aimed more towards read-intensive applications such as online archiving and media streaming, whereas the 6300 is suitable for mixed workloads that includes for example big data analysis and financial transaction services.
Unlike Intel, OCZ doesn't offer a model for write-intensive workloads with super high endurance (10 DWPD). OCZ explained to me that the reason is mostly cost efficiency -- a high endurance drive is doable, but it would require additional over-provisioning (which is what Intel does) that would increase the cost. OCZ did some market research and concluded that most customers are seeking for lower cost NVMe drives to make the transition, so OCZ didn't see a huge niche for the expensive high endurance drives. At $1.70 and $2.00 per gigabyte, the Z-Drive 6000 series is certainly price competitive against Intel's P3x00 series and the premium isn't too large compared to the enterprise SATA/SAS SSDs.
At the time of launch, the Z-Drive 6000 series will be available in capacities of 800GB, 1.6TB and 3.2TB. OCZ does, however, have a 6.4TB Z-Drive 6300 in development, which is scheduled to be available in Q4'15. The reason for the delay lies in NAND because in order to fit 8TB of flash inside a 2.5" chassis, OCZ needs to use 16-die packages, but currently the price of those is, from what I have heard, approximately 3x higher per gigabyte compared to 8-die stacks. The production as well as yields are expected to ramp up during this year, so the 6.4TB Z-Drive 6300 will be available once the NAND is available in high volume and at a reasonable price.
The Z-Drive 6000 series employs PMC-Sierra's "Princeton" controller, which is a native NVMe controller with support for 16 NAND channels. The controller supports PCIe 3.0 x8 interface, but OCZ has decided to split that to offer two independent 3.0 x4 connections to the host. The benefit of dual-port is redundancy and data availability because if one of the host systems is down (due to hardware failure for instance), the data is still accessible through the second host. This is a feature borrowed from SAS and the Z-Drive 6000 is actually the first NVMe drive to have dual-port support, which is something OCZ said its customers have been looking for.
Typical enterprise-class features, such as AES-256 encryption, full power loss protection and end-to-end data protection are all included as well. The Z-Drive 6000 series also features user-configurable power modes (15W, 20W and 25W), which can be used to limit the power consumption (and performance) in more temperature critical environments. A 2.5" 25W drive will definitely run hot and require a high amount of airflow for cooling, although OCZ did pay close attention to the chassis design to maximize heat dissipation and avoid throttling issues.
|OCZ Z-Drive 6000 Series Performance Specifications|
|Raw NAND Capacity||1,024GiB||2,048GiB||4,096GiB||1,024GiB||2,048GiB||4,096GiB|
|128KB Sequential Read||2.2GB/s||2.9GB/s||2.9GB/s||2.2GB/s||2.9GB/s||2.9GB/s|
|128KB Sequential Write||1.3GB/s||1.9GB/s||1.9GB/s||1.0GB/s||1.4GB/s||1.4GB/s|
|4KB Random Read||600K IOPS||700K IOPS||700K IOPS||600K IOPS||700K IOPS||700K IOPS|
|4KB Random Write||115K IOPS||160K IOPS||160K IOPS||75K IOPS||120K IOPS||120K IOPS|
|Mixed 4KB 30R / 70W||290K IOPS||330K IOPS||330K IOPS||230K IOPS||280K IOPS||280K IOPS|
|Idle Power Consumption||9W||9W||9W||9W||9W||9W|
|Active Power Consumption||25W||25W||25W||25W||25W||25W|
OCZ focused specifically on read performance and at up to 700K random read IOPS, the Z-Drive is definitely top of the class as Intel specs the P3700 at only 460K IOPS. Random write and mixed performance look excellent too, so it will be very interesting to see how the Z-Drive 6000 stacks up against the Intel and Samsung drives in objective third party testing. Note that the Z-Drive 6300 with eMLC is a bit slower in writes, which is due to the fact that eMLC NAND has higher program latencies (basically the voltage distribution for each voltage state is smaller, so programming requires more precision that is achieved by increasing the number of program pulse and verification iterations).
OCZ's own testing data puts the Z-Drive 6000 way ahead of the competition in terms of performance and consistency in both reads and writes. I would of course take the data with a grain of salt, but if the Z-Drive 6000 series is really as good as OCZ's marketing suggests, then OCZ has one hell of a drive in its hands. OCZ is currently sampling the Z-Drive 6000 series to key customers and partners, so I would expect more widespread availability to be later this year. All in all, it's a very potent drive that could very well help OCZ gain some market share in the enterprise space.
Post Your CommentPlease log in or sign up to comment.
View All Comments
melgross - Wednesday, May 20, 2015 - linkAs far as I'm concerned, the jury is still out on OCZ reliability, even with Toshiba ownership. Toshiba drives aren't exactly in the sakes class if Seagate and WD, so states for their own drive reliability are harder to come by, and I don't go by testimonials.
I'd like to see some long term testing here and in a couple of other sites known for that before thinking of buying in.
melgross - Wednesday, May 20, 2015 - linkWow! My own typo reliability is pretty high. Sorry.
Kristian Vättö - Wednesday, May 20, 2015 - linkIf you're referring to TechReport's endurance testing, that test is pointless in pointing out overall reliability. It only tests the endurance capability of the drive and NAND, which for years has been known not to be an issue for client workloads. For reliability testing you would needs hundreds of drives that are tested in numerous hosts and environments, which is something that no site has the resources to do.
That said, I did use a 512GB Vector as my boot drive for over two years (sent it to one of our other editors last week) and it never gave me any trouble, but of course a sample size of one doesn't mean much.
todlerix - Wednesday, May 20, 2015 - linkI think he might be referring to OCZ's peppered history, between the higher failure rate on their earlier SSDs and the scam they were running on consumers - changing NAND with worse performance without changing model number or even the SKU - Anand covered the story if I recall correctly.
melgross - Wednesday, May 20, 2015 - linktodlerix is correct. I'm talking about their high failure rate vs the rest of the SSD industry. The major reason the company went belly up, and was then bought by Toshiba was because of poor reliability. The drives failed fairly rapidly for numerous reasons related to poor QC.
Until we know that Toshiba has reversed that failure rate, the idea of buying an OCZ drive, particular drives at this price level seems to be a risk, particularly with toshibia's own QC issues.
willis936 - Wednesday, May 20, 2015 - linkThings change. We don't know the story with this controller. As an important little reminder: a line of hard drives called "deathstars" 5 years ago are now the most reliable consumer drives on the market.
ocz_tuff_bunny - Thursday, May 21, 2015 - linkHi melgross, thank you for your comments. As an OCZ representative I'm proud to say we've come a long way the old company no longer exists. Being a part of A Toshiba Group Company and having access to premium Toshiba NAND we have completely redone our products and put great focus on quality starting from the product design cycle through manufacturing. You can see our failure rate data on our website: http://ocz.com/consumer/quality We‘ve made this information public to further show evidence of our quality improvements. We believe we have a very competitive offering today when it comes to reliability and product quality and hope we will have the opportunity to prove it to you in the future.
Anonymous Blowhard - Monday, May 25, 2015 - linkWith a history like this:
- The Vertex 2's silent shift to poorly performing 25nm NAND
- Abnormally high failure rate in Vertex 3
- "Benchmark boosting" of the Vertex 4
no one should be surprised that the consumer sentiment against the OCZ brand is summed up as "once bitten, twice shy."
Xenonite - Wednesday, May 20, 2015 - linkI understand that general consumers will pay a premium for thinner and smaller components, but does it really make that much of a difference in the enterprise space to justify the cost per gigabyte increase just to fit into the 2.5" form factor?
Kristian Vättö - Wednesday, May 20, 2015 - linkYES! Smaller form factor yields higher density, which reduces overall space requirements as less racks are needed to achieve the same total capacity.