Dell U3014 LCD Review
by Chris Heinonen on April 15, 2013 2:00 PM ESTStraight out of the box, the Dell U3014 feels like a huge monitor. I’ve reviewed a lot of 27” displays this past year, but even then the U3014 is a different size beast. As is standard for Dell, the monitor comes packed well, but using cardboard and other recyclable components instead of Styrofoam that breaks apart easily and it’s good for repacking. Removing the panel and attaching it to the adjustable stand takes just seconds, and I’m still amazed so few vendors can get this simple thing right. No screws, no manual needed; it just slides into place and clicks right on.
The design itself hasn’t changed much since the U3011, though it does have a few noticeable features that other vendors would be smart to implement. On the left of the display are two USB 3.0 ports and a card reader that handles most common memory card formats. Inputs available consist of DVI-D, HDMI, DisplayPort, and a Mini DisplayPort. The presence of MiniDP and the lack of a VGA input are two big things to notice here. Dell ships the U3014 with a DisplayPort to MiniDP cable, and having both inputs means that a single cable can work with a video card that has either output. It also lets you hook it up to two different DisplayPort sources, such as a desktop and laptop, which becomes more essential as DisplayPort is the main standard now. It was a nice change of pace to be able to simply connect to any source instead of hunting for a cable. The lack of VGA shouldn’t affect anyone at this point, and it helps to reduce costs by dropping the price of an analog to digital converter.
The Dell also has a DisplayPort output, which lets you use Multi-Stream Transport (MST) to hook up another DisplayPort monitor directly to the Dell U3014. I tested this with the Nixeus VUE 27 that I mentioned earlier and found that it managed to work well, with a couple of caveats. Every time I’d come back to the computer, which goes to sleep automatically after 30 minutes in my case, the Nixeus wouldn’t power back on. I’d have to power cycle it for it to be recognized, but since the Nixeus sometimes does this when it’s the only monitor, I can’t be certain if this is an issue with MST, the Dell, or the Nixeus. Unfortunately, I have no other DisplayPort monitors around to test right now.
Also, I sometimes use the Nixeus for audio since it has internal speakers, and with 30” monitors on my desktop I can run out of room for speakers pretty easily. When feeding audio over MST, it's very crackly and features lots of breakups, like trying to do a Skype call over a 56k modem. Since audio typically works fine on the Nixeus, I have to assume this is related to MST and that it might not handle audio perfectly. I never saw an issue with video over MST, but audio did not work well at all.
Finally the U3014 has a connector for USB 3.0 in and two more USB 3.0 outputs next to the connectors, and a power output for the Dell SoundBar that connects to the bottom of the display. One feature that is missing that Dell displays usually have is rotation. Having a stand that raises high enough for a 30” monitor to rotate would be a bit large, and most people probably aren’t going to rotate it, but it certainly does make hooking up cables much easier.
Setup of the U3014 was as straightforward as you can get. I used the MiniDP input as my video card is a DisplayPort output, then hooked up the Nixeus directly to the U3014 using its DisplayPort cable. After connecting the USB cable I installed the card reader driver, installed the software packages Dell provides, and everything was ready to go.
Dell has one of the best OSD designs out there I think, with a simple menu system that keeps controls moving in the same direction, with unlabeled buttons that have their use put up on screen, so it’s easier to tell than trying to look for a silk screened label in the dark. This time I think that Dell made a step back with the U3014 by moving to touch sensitive controls. When your hand approaches the buttons, ones that you can use light up to indicate that you can hit them, but I found them to only be so-so in responsiveness. I really wish Dell had kept the traditional hard buttons but added the auto-sensing lights, and then it would be an ideal setup. As it is, it is only "okay" because of this change.
As an IPS display, viewing angles are basically perfect. The screen is so huge that any flaw in this area would be really bad, but in this case I don’t see any shifts in brightness until I get to at least 45-50 degrees from a few inches away, and then the very edge starts to darken a bit. IPS is still fantastic in this regard.
Dell U3014 | |
Video Inputs | 1xHDMI, 1x MiniDP, 1xDisplayPort, 1xDVI-DL |
Panel Type | IPS |
Pixel Pitch | 0.25 mm |
Colors | 1.07 Billion |
Brightness | 350 cd/m2 |
Contrast Ratio | 1000:1 |
Response Time | 6ms GTG |
Viewable Size | 30" |
Resolution | 2560x1600 |
Viewing Angle (H/V) | 178/178 |
Backlight | GB-LED |
Power Consumption (operation) | 60W Typical |
Power Consumption (standby) | < 0.5W |
Screen Treatment | Anti-Glare 3H Hard Coat |
Height-Adjustable | Yes (3.55") |
Tilt | Yes |
Pivot | No |
Swivel | Yes |
VESA Wall Mounting | Yes |
Dimensions w/ Base (WxHxD) | 27.15" x 19.00" x 7.93" |
Weight | 16.20 lbs. w/o stand |
Additional Features | USB 3.0 Hub (4 port), Headphone Output, Card Reader, DisplayPort out with MST |
Limited Warranty | 3 Years |
Accessories | MiniDP to DisplayPort cable, DVI-D cable, USB 3.0 cable, Cable Tie, Power Cable |
Price | $1,499 |
84 Comments
View All Comments
chazh - Friday, April 26, 2013 - link
i am a new about this.actually, what is the parameter for being a good monitor especially for gaming ?
to be honest, this monitor prices looks expensive. Now, i am using the Asus MX279H with a triple setup. So far, i really satisfied with the result.
yslee - Saturday, April 27, 2013 - link
Hmm, no word on how the anti-glare coat is like on this version? I have the 3008 WFP and the coat interferes a little on white backgrounds. It's not extremely annoying, but I'd like to see an improvement here regardless.secretmanofagent - Sunday, April 28, 2013 - link
How is the antiglare coating? The U2412M's coating drives me nuts.masotime - Friday, May 17, 2013 - link
Did anyone actually bother to test this against a MacBook / OSX? There's this bizzare oversharpening effect that is produced by this monitor - turning the "Sharpness" down to 0 still leaves some weird distortion. In addition, the colours look all wrong when the output is displayed from OSX - regardless of how much tweaking of the colour profiles I attempt.