Software

The Redragon Devarajas K556 is a fully programmable mechanical keyboard, which is exciting for a keyboard at this price range – until one finally gets to trying out the software. The software is a mere 4 MB download from the manufacturer’s website and is so basic that does not even have a name – it is just “keyboard software”. Nevertheless, it does allow for the selection of the lighting effects and the per-key programming of the keyboard and it can store up to three layout profiles. Everything is packed into a single screen, from the left side of which the user can choose one of the 20 lighting effects, adjust its direction, brightness, and speed.

 

The software offers per-key programmability but is very basic. The only options are the remapping of a key to another key or multimedia command or the use of a programmed macro. The macro recorder only records keyboard keystrokes, with the sole advanced option being to include the actual delays or not. We find it extremely unlikely that any advanced gamer or professional would be able to make practical use of the software - it is so basic that it may be useful to only a handful of users, under specific usage scenarios.

 

Per-Key Quality Testing

In order to test the quality and consistency of a keyboard, we are using a texture analyser that is programmed to measure and display the actuation force of the standard keyboard keys. By measuring the actuation force of every key, the quality and consistency of the keyboard can be quantified. It can also reveal design issues, such as the larger keys being far softer to press than the main keys of the keyboard. The actuation force is measured in Centinewton (cN). Some companies use another figure, gram-force (gf). The conversion formula is 1 cN = 1.02 gf (i.e. they are about the same). A high-quality keyboard should be as consistent as possible, with an average actuation force as near to the manufacturer's specs as possible and a disparity of less than ±10%. Greater differences are likely to be perceptible by users. It is worth noting that there is typically variance among keyboards, although most keyboard companies will try and maintain consistency - as with other reviews, we're testing our sample only.

The machine we use for our testing is accurate enough to provide readings with a resolution of 0.1 cN. For wider keys (e.g. Enter, Space Bar, etc.), the measurement is taking place at the center of the key, right above the switch. Note that large keys generally have a lower actuation force even if the actuation point is at the dead center of the key. This is natural, as the size and weight of the keycap reduce the required actuation force. For this reason, we do display the force required to actuate every key but we only use the results of the typically sized keys for our consistency calculations. Still, very low figures on medium sized keys, such as the Shift and Enter keys reveal design issues and can easily be perceptible by the user.

The results that we received from the testing of the Redragon Devarajas K556 are rather mediocre but consistent with those of keyboards using OUTEMU switches that we reviewed in the past. The disparity across the main keys of the keyboard is significant and users with exceptional tactile senses will actually discern the difference between certain keys. The average actuation force is 41.3 cN, which is low, significantly lower than what we would expect from a Brown switch clone. It may feel too light to people who are used to using a keyboard using other kinds of similar tactile switches but one cannot know the difference if that is the first mechanical keyboard they are using. The low actuation force may have the positive side of reducing long term fatigue if one’s fingers are trained enough not to bottom down every keystroke.

Hands-on Testing

I always try to use every keyboard that we review as my personal keyboard for at least a week. My typical weekly usage includes a lot of typing (about 100-150 pages), a few hours of gaming and some casual usage, such as internet browsing and messaging. I personally prefer Cherry MX Brown or similar (tactile) switches for such tasks but the audible tactile Blue switches are also close to my personal preference. As such, the OUTEMU brown switches of the Redragon Devarajas K556 RGB should have been almost perfect for my needs. Aside from a short learning curve, as my fingers were not used to the light force required by these switches and were bottoming down most keystrokes, the Redragon Devarajas K556 RGB indeed was nearly perfect for my professional needs. It was comfortable for long-term use and the keystroke feedback was light but adequate. The only thing that I missed was advanced programmable macros that I sometimes use, which were impossible to program with the rudimentary software this keyboard comes with.

When it comes to gaming, the Redragon Devarajas K556 actually has very few features that would actually assist a gamer. The macro recorder is elementary, and the vast majority of users will not be able to make practical use of it, reducing the list of gaming-related practical features to the RGB lighting profiles. As such, the keyboard does work fine and is comfortable for long-term gaming but does not really offer any gaming edge over any other similar mechanical keyboard.

Conclusion

Redragon markets the Devarajas K556 RGB as an advanced mechanical keyboard with RGB backlighting. For its retail price, which usually is around $50, it does seem like quite the catch. The company is, however, very careful with the marketing quotes, which seem to be focused on the metallic top plate of the keyboard, the removable switches, and its RGB backlighting, barely revealing that it can utilize macros and entirely skipping the mention of any programming capabilities. With the extremely basic software and the programmability of the keyboard being rudimentary at best, it is apparent that Redragon does not want to put attention on something that will backfire.

In terms of quality, Redragon did a quite good job considering the price range of the Devarajas K556 RGB. It is a well-made keyboard, with a solid frame and it is carefully assembled. Users who want a keyboard with a minimal desk footprint and/or a keyboard that they can easily clean will certainly appreciate its design. The keycaps are double-shot and are not better nor worse than those of most keyboards around this price range.

Our only long-term reliability concern is the application of the mechanical switches and, by that, we do not mean that OUTEMU’s switches are unreliable. Sure, these switches are certainly not as good as original Cherry MX products and that was proven during our testing, yet their long-term reliability is not poor at all. The issue here is that the switches are removable, which is both a boon and a curse. This design does allow for the user to easily replace a switch should it go bad, or even for mixing different types of switches on a single keyboard, yet the contacts are not permanently soldered onto the main PCB. Exposed contacts are susceptible to corrosion, which will not happen in a year or even two, but will inevitably happen over enough time.

It is apparent that Redragon released the Devarajas K556 RGB in order to compete against other mechanical gaming keyboards in terms of value, seemingly offering a quality mechanical keyboard with RGB backlighting at a significantly lower $57 retail price. However, the difference in terms of features and versatility over programmable gaming keyboards with better MCUs and proper software is by all means immense. If what you want is a mechanical keyboard with RGB backlight but do not really care about any advanced options, the Devarajas K556 RGB is a solid choice over advanced gaming keyboards that will cost twice as much (or more). On the other hand, if a truly versatile mechanical keyboard is what you need for your gaming and professional needs, the basicness of the Devarajas K556 RGB will probably disappoint.

 
Introduction, Packaging, and the Keyboard
POST A COMMENT

30 Comments

View All Comments

  • Sailor23M - Friday, February 5, 2021 - link

    Interesting choice of name (Devarajas - southern indian god king) for a chinese company :-) Reply
  • LMonty - Friday, February 5, 2021 - link

    I’ve had a Redrafon Varuna mech keyboard for 3 years now. After the 2 year mark, some keys have become occasionally unresponsive. When I pull the keycap, and press the switch directly (Outemu blue), it works. Then I return the keycap and everything is back to normal. It seems that the switches themselves are ok but it might be some dust between the switch and keycap that’s causing the issue.

    I bought it for the backlighting, because I use the computer at night with the lights off. So far I’ve been very happy with it. Cost me $36. The Devajaras software works with it (Varuna).
    Reply
  • Beaver M. - Sunday, February 7, 2021 - link

    No, its the switches giving out. And youre lucky it happened that late. You probably dont use it much.
    Double presses are another symptom of that.
    Reply
  • LMonty - Sunday, February 7, 2021 - link

    You're right I don't use it much. But how come the switches work when I remove the keycaps, and everything works again when I return the keycaps? Reply
  • MamiyaOtaru - Saturday, February 6, 2021 - link

    looks identical to any z-88 board on amazon (granvela, mechanical eagle, huoji, e-yooso, etc.) down to the chamfered silver edges Reply
  • dicobalt - Saturday, February 13, 2021 - link

    Too bad Chinese brand products always fail to function correctly after extended use. Reply
  • dicobalt - Saturday, February 13, 2021 - link

    You can run down to the auto shop and get some bulb grease for the switch contacts. It'll prevent air and moisture from degrading the contacts. Reply
  • akamburov - Thursday, February 25, 2021 - link

    I got a Redragon K555-RGB-UK a little over a year ago.
    And I'm generally ok with it (the noisy clicks don't bother me, only the other people on a conference call :) ).
    But I have one big problem - when I make repeated clicks on the SAME key it "eats" some of them.
    When I click different keys it's fast and accurate, but when I'm clicking same keys seems like some software feature decides that some of my clicks are not necessary and ignores them.
    So typically if I click backspace 6 times for example because I know I want to delete 6 chars, it might ignore couple of clicks and I end up deleting only 4, and since it's not reliable I'm never sure where my cursor is without looking and patiently correct again.
    Other than this issue I don't have complaints.
    Reply
  • Ebsolas - Sunday, March 7, 2021 - link

    My personal experience with this keyboard:
    I bought this keyboard a couple years ago. It was a much welcome replacement for my 20+ year old PS/2 one that had keys that were so sloppy that some of them (the 'k' key in particular) actually flipped up vertically if you pressed along the bottom.

    This keyboard has been a dream. And yes, I can confirm the longer keys do feel a bit hollow when pressing them, but most of them have gotten better with use. The biggest exception being the backspace key.

    As far as macros go, I just use auto hot key which is fine for me since I have a repertoire of scripts I've been maintaining across several computers. So far the only use I got out of the included software was to set my preferred RGB and bump up the polling rate. Any keyboard layout stuff I use a freeware called key tweak.
    Reply
  • CalcProgrammer1 - Thursday, March 18, 2021 - link

    I and some others on Discord have been working to port the QMK firmware to this and othe Sonix SN32F248/B based keyboards. I have QMK running on mine with OpenRGB control, which when combined with an open source RGB effects engine (Aurora or Artemis) can provide fancy RGB game integrations, music visualizer, and more. With this new firmware the only real downsides of this keyboard are gone. It easily does what some $100+ keyboards do and with better build quality. I plan to post a YouTube tutorial on converting your K556 to run QMK firmware soon, and the process is reversible if you decide you prefer the stock firmware. Reply

Log in

Don't have an account? Sign up now