The Corsair Gaming K100 RGB Keyboard Review: Optical-Mechanical Masterpiece
by E. Fylladitakis on November 19, 2020 8:00 AM EST- Posted in
- Peripherals
- Corsair
- Mechanical Keyboards
- RGB
The iCUE (Corsair Utility Engine) Software
Corsair’s Utility Engine, or iCUE for short, is one of the most advanced (and complex) software packages for the control of PC peripherals, with the company adding new features and options every few months. The latest version of the software is largely unchanged since our last encounter with it, which was during our review of the K95 RGB Platinum. Since then, the only noticeable changes have been Corsair adding further options in order to accommodate the extra features that the K100 RGB brings.
The CUE can be used to control all of Corsair’s peripherals that support it, from keyboards to mousepads. Once a K100 RGB keyboard is detected, the software will add another loop in its tutorials, demoing the functionality and possibilities of the extra rotary wheel. By default, users can use the wheel to adjust brightness settings, multimedia controls, macro recording, application switching, scrolling, and zooming. Any number of these functions can be active in any programmed profile, with the user cyclically switching between them using the wheel’s central button. Additional functions can also be programmed, as users can add their own programmed actions to the functions of the rotary wheel.
The profiles list and programmer can be found at the top left corner of the interface. In the case of the K100 RGB Platinum, there are two hardware profiles that are stored inside the keyboard, plus an infinite number of software profiles. The hardware profiles do not require the software when saved, meaning that all of the advanced and lighting functions will work with the keyboard attached to virtually any computer. As long as that is possible of course; for example, you cannot use a launch application command if that particular application is not installed in the PC that the keyboard is attached to.
Each profile can be tethered to specific applications, automatically activating when that application is running. Note that tethered profiles will be skipped when manually switching profiles using the keyboard’s button if their application is not running. On the other hand, if an application with a tethered profile has been launched, the keyboard button cannot be used to rotate to profiles that are not tethered to the specific application. This may sound confusing at first but it is a clever implementation that allows the programming of dozens of different profiles, yet the button will only rotate the profiles that are tethered to specific games/applications instead of going through all of them. Further extra options include the use of custom icons and background images per profile.
Corsair still offers the most comprehensive programming capabilities that we have seen to date. There is virtually no limit to what each key can be programmed (or reprogrammed) to do. Once the Actions menu has been selected, a list of the actions available for this profile will appear. Note that programmed actions are profile-specific and will not appear into every profile unless they are manually moved into the general library.
The K100 RGB supports a very wide range of actions, from complex Macros to simple media commands. Once a new action is being programmed, the user is called to select the type of the action from a drop-down list. The options are Macro, Text, Remap, Media, App Launch, Timer, Profile Switching and disable.
Aside from the keystrokes and delays, the CUE software can also record the relative mouse movements, clicks and scrolling. Unfortunately, it cannot record the absolute mouse position while recording a macro at the time of this review, but they can be manually inserted by the user afterwards. An extra option allows the user to select a sound to play when the macro key has been pressed. If the “Advanced” mode is activated, an extra menu allows the user to select the trigger (on press/release, while pressed, toggle), the repeat rate and the follow-up action of each macro.
In the Text section, the user can enter bodies of text that will be typed once the specific key has been pressed. These actions are useful for the quick insertions of common chat messages, signatures, etc. Note that the software does not paste but actually “types” the text manually, with the delay between characters programmable by the user, meaning that the text insertion option will function in any game or software, regardless whether clipboard commands can be used.
The Remap Key and Media options are straightforward, allowing the user to remap any given key to any other, including mouse clicks and keystrokes (Shift+, CTRL+, ALT+ commands, etc.). It can also imitate key holding, maintain the key press for a programmable number of seconds after the key has been pressed or until it is pressed again.
The other four sections are relatively simple and straightforward. The Timer options allow the user to program timers that can play sounds, initiate lighting effects, or execute other actions (e.g. macros) once the countdown ends. The minimum resolution of the countdown is 1 second. From the App Launch section, the user can use single keystrokes to launch external programs and applications. The Profile Switching option allows the user to either emulate the single hardware button and rotate between profiles or to program a key to directly jump to a specific profile. It may be a useful function if the user is using a very long, complex list of profiles. Finally, the Disable Key option allows the user to disable a key entirely or if the Lock button is activated.
After programming any given action, the action can be allocated to any key of the keyboard by simply clicking on it. There is no “save” button, every change is being automatically stored as the user programs and assigns actions, but there is a “revert” button that undoes the last change if something does not go as planned while programming an action.
In the Lighting Effects section, the user can select from popular lighting effects or static lighting via a drop-down list. Once an effect has been selected, basic options such as the speed of the lighting or the color (for effects that employ static lighting) can be adjusted with ease. This makes the selection of a lighting setup per profile literally a matter of few seconds. There are also options that are meant to synergistically operate with Corsair’s Link interface but some work just fine even if no other Corsair products are present in the system. For example, the “Temperature” option will change the lighting of the keyboard depending on the temperature reading taken by a system sensor, such as the CPU temperature, regardless if there is a Corsair Commander or another Corsair product in the system or not.
The Performance section, can be used to fine-tune just a couple of settings. These settings are the keystroke combinations that the Win Lock key will disable (excluding any extra keys that may be disabled via the corresponding programmable action) and the color of the two buttons at the top left side of the keyboard. Two colors can be programmed to the Lock indicator, one for when it is activated and one while it is not. All of these settings are profile-specific, meaning that they can differ between profiles, allowing the user to identify profiles that may be using the same lighting options from the color of the indicators alone.
Note that, by default, the polling rate of the K100 RGB is set to 1000 Hz. In order to switch the polling rate to 4000 Hz, users need to access the device settings via the iCUE software and manually change that setting. As this setting is likely to cause compatibility issues and has virtually no practical use, we suggest leaving it at its default setting.
Per-Key Quality Testing
In order to test the quality and consistency of a keyboard, we are using a texture analyser that is programmed to measure and display the actuation force of the standard keyboard keys. By measuring the actuation force of every key, the quality and consistency of the keyboard can be quantified. It can also reveal design issues, such as the larger keys being far softer to press than the main keys of the keyboard. The actuation force is measured in Centinewton (cN). Some companies use another figure, gram-force (gf). The conversion formula is 1 cN = 1.02 gf (i.e. they are about the same). A high quality keyboard should be as consistent as possible, with an average actuation force as near to the manufacturer's specs as possible and a disparity of less than ±10%. Greater differences are likely to be perceptible by users. It is worth noting that there is typically variance among keyboards, although most keyboard companies will try and maintain consistency - as with other reviews, we're testing our sample only.
The machine we use for our testing is accurate enough to provide readings with a resolution of 0.1 cN. For wider keys (e.g. Enter, Space Bar, etc.), the measurement is taking place at the center of the key, right above the switch. Note that large keys generally have a lower actuation force even if the actuation point is at the dead center of the key. This is natural, as the size and weight of the keycap reduces the required actuation force. For this reason, we do display the force required to actuate every key but we only use the results of the typical sized keys for our consistency calculations. Still, very low figures on medium sized keys, such as the Shift and Enter keys reveal design issues and can easily be perceptible by the user.
Going into this review, we did not know what to expect from Corsair’s optical-mechanical switches. So we were greatly surprised with what we found, as the OPX switches gave us much better test results than any mechanical switch before them has. Our measured average actuation force across the main keys of the keyboard was 44.1 cN, the exact figure specified by Corsair (OPX switches are rated at 45 gram-force, or 44.13 cN). The disparity across the main keys of the keyboard is at ±0.68%, a variance about one-quarter that of any mechanical keyboard that we have tested to this date. Corsair has gotten their variance so low that it's not going to be detectable by human hands, and you'd need high precision testing equipment to find it.
Hands-on Testing
I always try to use every keyboard that we review as my personal keyboard for at least a week. My typical weekly usage includes a lot of typing (about 100-150 pages), a few hours of gaming and some casual usage, such as internet browsing and messaging. I personally prefer Cherry MX Brown or similar (tactile) switches for such tasks but I do not find linear switches to be uncomfortable either. My presumption was that the OPX switches would feel like Cherry MX Red switches but I was definitely mistaken. The OPX switches have a nearly flat force-travel curve, meaning that they exhibit almost the same resistance across the entirety of their travel. As such, their motion feels smoother than that of linear mechanical switches. This is very useful for professional users and especially typists, as the smooth movements and reasonable amount of force required to press the keys result to very low long-term use fatigue. Getting used to just slightly pressing the keys instead of nearly (or totally) bottoming them down takes quite a bit of practice but the K100 RGB becomes a joy to work with once that happens.
Naturally, the K100 RGB Optical-Mechanical keyboard is excellent for gaming – that was its purpose to begin with. It is both practical and comfortable for long gaming sessions, with the iCUE software allowing users to work marvels in games both simple and complex. The short actuation distance of the OPX switches does not really offer any kind of competitive advantage, but the zero debounce does help, allowing for very rapid keypresses to seamlessly register without errors. It takes exceptional reflexes and focus to actually take full advantage of this but we suspect that a good number experienced gamers already possess such tactile skills. On the other hand, the 4000 Hz polling rate seems to be of litle use besides bragging rights – there is no human that can react to such speeds and the difference between 1 msec and 0.25 msec is impossible to discern by any of our senses.
82 Comments
View All Comments
FunBunny2 - Monday, November 23, 2020 - link
"acutation force correlates with travel disance"not even close to being true. my beloved IBM Model M is nearly as tough as a mechanical typewriter keyboard to press, and is much shorter than the bottoming necessary on your average rubber dome. so, no.
the total 'force', somehow measured, viz. pressure X distance may be so. those wafer thin keyboards with scissors type keys...
K_Space - Tuesday, November 24, 2020 - link
I actually agree FunBunny... you may have missed my correction on the next message (no edit/correct function as always in AT comments). Those who presume that acutation force correlates with travel disance would be correct if it wasn't for spring constant in Cherry MX keyboards (for the sake of simplicity you can think of it as a spring that modulate the pressure or force exerted on the keycap).The primary point of a mechanical keyboard (at least historically) was to be able to acutate the key WITHOUT buttoming out thereby allowing for increasing typing speed - therefore those short travel distances shouldn't be a suprise! In this respect your IBM Model M is seen as the mama of mechanical keyboards with its famous "buckling springs". Those things were loud though!
FunBunny2 - Wednesday, November 25, 2020 - link
"In this respect your IBM Model M is seen as the mama of mechanical keyboards with its famous "buckling springs". Those things were loud though! "and, oddly enough, when I dove into a schematic I discovered what blew my mind: the keyboard is just a rubber dome (sorta) implementation! the buckling spring actuation drives a lever arm into the dome. the keyset sits over a sheet of contacts. who woudda thunk it? https://en.wikipedia.org/wiki/Buckling_spring
charlesg - Thursday, November 19, 2020 - link
I don't know how anyone can use a non ergo keyboard for an extended period of time.Ryan1981 - Thursday, November 19, 2020 - link
I'd like this keyboard to become mainstream: https://www.artlebedev.com/optimus/maximus/. They also do a keyboard that's basically a large display like a smartphone but somehow I don't think you can type blind on that (but never tried so who knows).phila - Thursday, November 19, 2020 - link
https://mountain.gg/keyboards/everest-max/ Mountain.GG keyboard has a few keys that are configurable like this. I find it pretty usefulJimios - Thursday, November 19, 2020 - link
Although briefly mentioned in the review, I would like to point out in case anyone missed it that this keyboard comes with double-shot PBT keycaps, which is arguably more important than other stuff analysed in more detail by the reviewer.Jimios - Thursday, November 19, 2020 - link
I personally recommend the Leopold FC900R for half the price, classier looking and without the RGB sillyness, which is built like a tank and I love using it daily for 2+ years now (office work with a LOT of typing).I would love to see Anandtech reviewing less popular (but likely better) mechanical keyboards, such as Leopold, Ducky, IKBC, Vortex, etc.
sonny73n - Friday, November 20, 2020 - link
Completely agree! I've been using a Ducky since 2011 and it's still good as new. I love it and I think it'll last forever.Arbie - Saturday, November 21, 2020 - link
From a quick search, the Leopold keyboards are $400 on Newegg; NA on Amazon.