ASRock Z690 Phantom Gaming 4/D5

One of ASRock's more modest and entry-level gaming-focused Z690 models comes via the Z690 Phantom Gaming 4/D5, with the D5 signifying this model supports DDR5 memory and not DDR4. Equipped with an entry-level feature set, and an equally entry-level price point to boot, the ASRock Z690 Phantom Gaming 4/D5 has one of the more basic looks of all its Z690 models. It uses a primarily black theme with simple silver heatsinks throughout. It's also one of the most bare looking PCBs from all of the Z690 models at launch, with a real focus on cutting costs for users looking for an affordable model.

Looking at the board's specifications, there are two full-length PCIe slots, with one full-length PCIe 5.0 x16 slot, one full-length PCIe 4.0 x4 slot, and three smaller PCIe 3.0 x1 slots. Located in the top right-hand corner is the board's memory slots, with four in total offering support for DDR5-5800, and a combined total of 128 GB. Storage options are relatively basic as expected for a board of this pedigree, with three PCIe 4.0 x4 M.2 slots, with one of these also supporting SATA-based drives. The ASRock Z690 Phantom Gaming 4/D5 also includes just four SATA ports with support for RAID 0, 1, 5, and 10 arrays.

On the rear panel is a modest selection of input and output, including one USB 3.2 G2 Type-C, one USB 3.2 G2 Type-A, four USB 3.2 G1 Type-A, and two USB 2.0 ports. An Intel I219-V Gigabit Ethernet controller is the board's only source of networking support, while a Realtek ALC897 powers three 3.5 mm audio jacks. Finishing off the rear panel is a single HDMI port, with a small BIOS Flashback button and a PS/2 combo port for users preferring to use legacy peripherals.

ASRock Z690 PG Velocita (DDR5) ASRock Z690 Phantom Gaming-ITX/TB4 (DDR5)
Comments Locked

126 Comments

View All Comments

  • Dahak - Tuesday, November 9, 2021 - link

    Will there be a list of DDR4 only board as well?
  • Ryan Smith - Wednesday, November 10, 2021 - link

    Yes, we're also putting together a guide for DDR4 boards.
  • jh20001 - Wednesday, December 1, 2021 - link

    Any news on the DDR4 story? Would be nice to know what model is the best for performance/features in the eyes of others.
  • Flunk - Tuesday, November 9, 2021 - link

    Intel's actually released a compelling new chipset? I'm surprised to see DDR5 and PCIe 5 support, but USB 4 seems to be notably absent, despite there being no reason at all to omit it. Intel is finally one-upping AMD after a few years of playing #2.
  • Exotica - Tuesday, November 9, 2021 - link

    Thunderbolt4 is usb4 capable…
  • CharonPDX - Tuesday, November 9, 2021 - link

    Yep, the only thing USB4 adds over "USB 3.2 2x2" is Thunderbolt support. Therefore any Thunderbolt 4 device is automatically USB4. In fact, essentially any board with "Thunderbolt 3" along with USB 3.2 2x2 basically get "USB4" status for free.
  • DigitalFreak - Tuesday, November 9, 2021 - link

    USB 3.2 2x2 is 20 Gbps. USB 4 is 40 Gbps.
  • 12345 - Wednesday, November 10, 2021 - link

    That's why they mentioned TB3. 40Gbps support is also optional for USB4.
  • 12345 - Wednesday, November 10, 2021 - link

    DP 2.0 is mandatory for USB4 so TB3 support isn't good enough.
  • KarlKastor - Wednesday, November 10, 2021 - link

    That is only the name. The question is, with what speed you can run USB devices.

Log in

Don't have an account? Sign up now