LG 34UM67 Conclusions

There are a couple aspects to this review that we want to address in the conclusion. First is how the 34UM67 fares as a monitor in general. Here things are generally similar to what we said about one of its precursors, the LG 29EA93. The 21:9 aspect ratio is at the very least an interesting alternative to other display options. If you watch a lot of anamorphic widescreen movies, it can be awesome; for playing games, the wider field of view is again very interesting, at least when the game properly supports the aspect ratio. In some ways it’s like having a couple of 1280x1080 displays sitting next to each other, except with zero bezel gap between them. While there are plenty of people that prefer taller aspect ratios (e.g. 16:10 vs. 16:9), there is also a market for even wider aspect ratios like 21:9. This may be more of a niche market than other options, but it’s definitely a viable niche.

Getting into the monitor characteristics, the 34UM67 is a very large display compared to what most people use. Being a 34” UltraWide display, it’s actually much wider than my old 30” WQXGA display that I used for most of the past ten years. My 30” display measures just over 27” wide and is 19-23” tall (with height adjustment); in contrast the 34UM67 is just under 33” wide, but it’s only 18.5” tall. If you’re height constrained but have the ability to support multiple displays, something like this 34” UltraWide format might be an interesting alternative; on the other hand, on a typical office desk the horizontal footprint can be absolutely massive.

Out of the box, the general image quality is good if not exceptional. Colors are reasonably accurate, contrast is a decent ~1000:1, and at least subjectively the pixel response times are acceptable for any purpose including intense gaming. Calibrating the display further improves the color accuracy, though there are some colors that still aren’t “perfect”. Uniformity overall is also merely acceptable – I never really noticed the problems in daily use, but there are areas that are off compared to the center. The use of an IPS panel is still a plus compared with the numerous TN displays, but for professional imaging use there are definitely better options out there, and the price of $649 MSRP means it’s not a great bargain either.

The second aspect to consider is how the display works as a gaming monitor, and in particular how well FreeSync functions. Here’s where things get a bit dicey, depending on your hardware. Running within the supported variable refresh rate range of 48-75 Hz, the 34UM67 is very smooth and it delivers all of the benefits previously enjoyed by NVIDIA G-SYNC users, just with an AMD GPU. The problem is what happens when you fall out of that range. Go above it and at the maximum 75Hz tearing is still visible, though you can also opt for a VSYNC on experience and 75 FPS is a bit better than the usual 60 FPS cap of VSYNC. Falling below the minimum supported refresh rate on the other hand is a much worse experience.

With VSYNC off behavior, tearing is extremely visible. It’s perhaps no worse than a normal 60Hz fixed refresh rate (well, it’s slightly worse as updating 48 times per second means each frame with tearing is visible longer than the usual 1/60s) but it’s definitely not better. Turn VSYNC on and you eliminate tearing but introduce judder. While it’s tempting to make comparisons between G-SYNC and FreeSync, it’s also important to remember that no G-SYNC display uses an IPS 21:9 aspect ratio panel, possibly because the limited 48Hz-75Hz dynamic refresh rate range is just too limited.

That’s ultimately the Achilles’ Heel of the LG 34UM67: as one of the very first FreeSync displays, and coming out around the same time as we’re seeing 40-144Hz G-SYNC and FreeSync displays, it can feel limited. Paired with a Radeon R9 290X, the vast majority of games can easily run at 48+ FPS and if that’s what you have it’s still a good experience. But for a lower price you can find 27” 2560x1440 AHVA displays that can be overclocked to 120Hz, and 30” 2560x1600 IPS displays that can support overclocked refresh rates of up to 120Hz only cost a bit more. Given the choice between an IPS/AHVA display running at 120Hz and a FreeSync display running at 48-75Hz, I’d generally go for the former.

This isn’t an indictment of FreeSync in general, however. The option to support lower minimum refresh rates exists, and I’d say 30Hz is really all you need – if you fall below 35-40 FPS, the smoothness already starts to go away, and dropping to 20FPS for a few frames will create a hiccup with or without dynamic refresh rates. But limiting the range refresh rates to just 28 steps, from 48-75Hz, negates much of the purpose of using FreeSync in the first place. We’ll have to see how other FreeSync/DisplayPort Adaptive-Sync displays compare before we can come to any real conclusions, and there’s definitely potential; the LG display simply isn’t the best showcase of the technology.

Finally, looking at the entire display and graphics ecosystems, as far as pricing goes AMD currently offers a clear advantage. An R9 290X is generally competitive with the GTX 970 at worst, and 15-20% faster at best, which means it can often go up against NVIDIA’s GTX 980 while saving the consumer over $200. FreeSync displays likewise look to have a pricing advantage of $100 or more compared with G-SYNC displays, but the comparisons are a lot less direct in that case. While paper specs can look similar (e.g. TN panel with 40-144Hz dynamic refresh rates), things like color quality, features, and gaming performance (i.e. ghosting) are all important. Just as a GTX 980 costs more than R9 290X but generally delivers a superior experience, we may see a similar situation in the display arena.

If you’re after dynamic refresh rates, you’re inherently locked into one GPU vendor or the other right now. NVIDIA could potentially offer support for DisplayPort Adaptive-Sync displays in the future, but so far they’re not committing to the standard. AMD on the other hand can’t ever support G-SYNC displays (at least not the dynamic refresh rate aspect), so FreeSync is the only option. High static refresh rate displays on the other hand work with both vendors equally well and cost less as a bonus, so if you need a display right now they’re the safest bet. Otherwise, given the long working lives of monitors, continuing to wait and see how the market develops isn’t a bad idea.

LG 34UM67 Power Use, Gamut, and Input Lag
Comments Locked

96 Comments

View All Comments

  • FXi - Monday, May 25, 2015 - link

    It would have been helpful to list in the article what the "consistent" constrast ratio was. I'd be guessing it was more likt 750/800:1 given IPS performance in the past but while low and high are very useful, knowing where someone will likely land being somewhere in the middle of the road would be useful to readers. Only making a suggestion. I am always grateful for the things you DO include in your reviews and I read them pretty through and through.
  • KarenS - Friday, July 24, 2015 - link

    There are no VESA mounting holes on this monitor. Could you verify that you reviewed the correct one? I bought a "34UM67" and did not find any VESA mounting holes. The pictures on your site shows no mounting holes either.
  • Jiffybag - Sunday, October 11, 2015 - link

    How did he flatten the game curve when the monitor has no gamma controls? I bought this monitor and my gamma looks exactly like his pre calibration gamma image (starting high ending low) but as thre is NO way to calibrate gamma (only colour / white balance) I was unable to correct it? Anyone care to explain? Jarred?
  • Jiffybag - Sunday, October 11, 2015 - link

    Game = gamma (auto correct got me) :)

    My settings:
    Backlight set to 20 (120cd/m2)
    Black adjuster set to 0
    Using i1Display Pro
    Power savings etc all turned off
    Colour calibration is good (all under delta 1.6)
    Colour temp is spot on 6500k
    Grey scale delta error all less than 1
    Gamma set to "1" in menu

    Gamma average is 2.2 BUT it's a diagonal line \ starting high (at 2.4) and ending at 1.9.
    As there is no 10point gamma control I am unable to figure out how to flatten the gamma as there is no gamma controls? My HDTV has 10pt gamma control so I can raise 10/20/30 and lower 70/80/90 to flatten a curve, but this monitor has absolutely NO (ZERO) gamma controls so how on earth can he flatten it to such a decent flat line? I'm baffled? Unless he used the dynamic contrast adjuster (black level adjuster) and/or used his GFX card to make adjustments to his output, I'm unsure how he was able to do this. I'd love to know though if anyone can enlighten me :)
  • Jiffybag - Sunday, October 11, 2015 - link

    I have a 34UM67 and it has VESA mounting holes, but no gamma correction control? :-/
  • rya - Monday, October 19, 2015 - link

    has anyone tried overclocking this monitor or altering the freesync range? I'd love to run freesync from 9hz - 80hz (or higher) if possible.

Log in

Don't have an account? Sign up now