Gaming 1600x1200 4xAA/8xAF Benchmarks

We'll start our gaming performance comparisons with the "standard" SLI/CrossFire settings: 1600x1200 with 4xAA/8xAF. Comparative results from recent motherboard reviews using an E6700 CPU are included. However, it is difficult to make direct comparisons due to the number of variables involved: different BIOS settings, different components, and different drivers can all affect the results. Take the comparisons with some reservation, as the ABS results in some cases are lower than expected, while in other tests it scores slightly higher. Most likely, the updated ATI drivers along with other minor differences account for the changes, and you can see how the ABS X9 compares to our tests conducted with the same Intel 975XBX motherboard.

Battlefield 2 (v1.22) - SLI/CF Gaming

F.E.A.R. (v1.06) - SLI/CF Gaming

Half-Life 2: Lost Coast - SLI/CF Gaming

Quake 4 (v1.2) - SLI/CF Gaming

Serious Sam 2 (v2.070) - SLI/CF Gaming

A few things stand out once we start looking at gaming performance. First, the ABS system seems to underperform slightly relative to our test motherboards. Not by much, but even the overclocked ABS configuration isn't able to place ahead of the other CrossFire solutions in all tests. We can likely chalk up the minor differences in performance between the ABS system and the stock Intel 975XBX motherboard to the discrepancy in component choices, memory timings, and drivers and put the margin of error at around 5%. At that point everything looks close to a tie.

The second item worth nothing is that the NVIDIA SLI solution outperforms all of the X1900 CrossFire configurations, including the 20% overclocked ABS, even when using a slower CPU. Other games might perform better on CrossFire, but there certainly appears to be plenty of room for improvement in the ATI drivers, particularly when it comes to Core 2 optimizations.

That leads us to the last and possibly most important point: even with an ultra fast processor and one of the fastest GPU configurations currently available, 1600x1200 4xAA/8xAF gaming is almost completely GPU limited on all recent titles. In fact, 1280x1024 4xAA/8xAF also appears to be GPU limited on many games, as you'll see on the next page. If gaming is your primary concern, and especially if you plan on running at higher resolutions with 4xAA, faster graphics cards are going to be far more important than faster processors.

Standard Application Benchmarks Gaming Resolution Scaling
Comments Locked

48 Comments

View All Comments

  • yyrkoon - Tuesday, August 22, 2006 - link

    Ah, I was wondering why you were mentioning .NET in technologies you were unhappy with. .NET is really a boon for programmers, and even more so for hobbyist programmers such as myself (it makes things much easier, and faster to code very usefull applications ).
  • JarredWalton - Monday, August 21, 2006 - link

    Of course, after looking at some of the results on the AM2 RD580, maybe SLI *is* faster in most situations. We need to test additional games to say for sure, which I think Derek will be doing on his next GPU article.
  • yyrkoon - Sunday, August 20, 2006 - link

    I think they were talking about the intel crossfire implementation is immature. Irregaurdless, comparred to nVidia technology, Crossfire technology IS Immature.
  • giantpandaman2 - Sunday, August 20, 2006 - link

    Here's my suggestion to have better system reviews:

    1) A ratings system where you break down things like value, game performance, work performance, ease of use/documentation, customer service and the like. Similar to CNET and HardOCP.

    2) A greater focus on the complete end user experience. How easy was it to order the system? How long did it take to get it after ordering. Was the packaging good? How was customer service when you had a part fail (made up or real)?

    3) A handy list of comparable systems from other vendors w/reviews of those systems if you have them. Or if there are other respectable sites that have reviews of them. (Now this is a pie in the sky type of request, but it'd be an extremely nice little function.)

    4) A small separate box for the "reviewers tilt." In other words, whether the reviewer would buy the system or get something else. For example, for the added cost would you buy a mac? Would you prefer a different type of memory? What concerns do you have with the system? IE-Case cooling would be poor if you added a second video card. Etc. This would be totally subjective, hence why it'd have to be offset from the normal review.

    5) A chance for the vendor to respond to any questions or criticisms you had with the system and/or customer experience.

    Now, honestly, given your focus on less consumer oriented computer stuff I don't know how far you'd want to go with any of these. As much as I understand why people dislike HardOCP a couple of things they've put in that are nice is a focus on customer experience in system reviews and they're slight separation of consumer oriented reviews as compared to enthusiast reviews.

    Personally I'd love it if Anandtech created more focused regular content based around Business IT/Consumer/Enthusiast rather than your current back end classification of stuff. (Motherboard/CPU/Video/etc.) Why? Well, I think you'd be able to up your number of reviews. Quicker less technical reviews for a lot of the consumer stuff. IE-You could quickly do reviews of a lot of cheap digital cameras and OS iterations. And far more technical and in depth reviews of expensive cameras or OS iterations when used in business/network settings.

    Heck, you could almost do both types of reviews at once, get out the consumer one early, then the more in depth one later. That way low end consumers don't have to wade through a lot of stuff they don't understand or may not be interested in, and gurus can get the fix they need. Anyhow, just a few ideas out of many, but this post is getting too long. :)
  • yyrkoon - Sunday, August 20, 2006 - link

    I'd have to agree somewhat. Breaking down how a system performs into categories I think is a good idea. Something along the lines of how TH does it but perhaps with your own little twist. Doing two seperate reviews on a product however, I would think is a bit overboard. People like me, who are very interrested in the technical aspect of hardware, will pick and choose thier articles, which may give you less readers for those type of articles, but I think the over all experience for everyone would be fine. My suggestion for this type of thing, would be maybe to make a dumbed down review, if you think readers of said article may not be interrested in the technical aspect, and just leave it at that. *shrug*

    I still think you guys do a bang up job, and it isnt fanboyism when I repeat the words "I'll read your articles over tomshardware.com's reviews any day". It just seems to me, that you guys at AT are less worried about how the manufactuers feels about your reviews, and call it how you see it.

    Now, for a couple of gripes:

    1) PLEASE work on your forums, its ugly, not very organized, and the over all experience just doesnt "leave a good taste in my mouth".

    2) I've sent you guys an email concerning this issue, Animated ads within the text area of your articles are very annoying, and make it sometimes very hard to read / concentrate on the article on hand. Since this, I've disabled all images within my browser from your site, but what IF I want to veiw a photo relating to the article ?!

    Take these gripes for what they are worth, and not personally please, it is my hope that these gripes will help you improve your reader overall experience whilst on your site, and forums.
  • chunkychun - Sunday, August 20, 2006 - link

    I am a non techie and I am glad you review the OEM systems, high end or low end. Although I don't have the time or patience to learn how to build a computer, I enjoy reading which components are perfered by more experienced builders. Keep up the good work.
  • SunLord - Saturday, August 19, 2006 - link

    Now we jsut need Anandtech to get a ABS Ultimate M6 Sniper AM2 speced out with as much incommon as possible and see what the performance difference is on a real world systems...
  • JarredWalton - Saturday, August 19, 2006 - link

    It depends on what you're doing. If you're playing games at high resolutions, the difference in performance is negligible. If you're doing video encoding or 3D rendering or certain other tasks, Core 2 Duo is still quite a bit faster -- and even more so when overclocked to 3.52 GHz. If you want to buy a $4000 computer, I really see no reason to purchase an AMD system right now. However, I don't think most people should spend that much money on the computer system regardless of processor type. You can build a system that is almost as fast (in games) for about $2000 -- using either Intel or AMD processors.
  • pottervillian - Saturday, August 19, 2006 - link

    One Error:

    Page 2: Features and Price
    Component Price List
    "Power Suply: Enermax Liberty 620W Modular PSU 155"

    Other than that, this is a great article. Too bad I don't have a rich uncle.

  • eastvillager - Saturday, August 19, 2006 - link

    If you had a rich uncle, you'd be better off getting cash and building it yourself, or paying a friend to do it. These prices are crazy.

Log in

Don't have an account? Sign up now