The GIGABYTE MZ72-HB0 (Rev 3.0) Motherboard Review: Dual Socket 3rd Gen EPYCby Gavin Bonshor on August 2, 2021 9:30 AM EST
Back in March, we reviewed AMD's latest Zen 3 based EPYC 7003 processors, including the 64-core EPYC 7763 and 7713. We've updated the data back in June with a retail motherboard, and it scores much higher, showing how EPYC Milan can be refined more than it was at launch. Putting two 64-core processors into a system requires a more than capable motherboard, and today on the test bench is the GIGABYTE MZ720-HB0 (Revision 3.0), which has plenty of features to boast about. Some of the most important ones include five full-length PCIe 4.0 slots, dual 10 GbE, lots of PCIe 4.0 NVMe and SATA storage options, as well as dual SP3 sockets, and sixteen memory slots with support for up to 4 TB of capacity.
GIGABYTE MZ72-HB0 Overview
Although the GIGABYTE MZ72-HB0 motherboard for AMD's EPYC processors fundamentally isn't new, we reported back during Computex 2021 that GIGABYTE released a new revision (Rev 3.0) of this model to support both Milan (7003) and Rome (7002) out of the box, as the initial Revision 1.0 model only included support for Naples (7001) and Rome (7002). This is due to a small maneuvering of AMD's product stack - the latest 64 core processors now push a TDP of 280 W per processor, rather than 240 W, and while the socket is the same across all three generations, you will find that motherboards either support 7001+7002, or 7002+7003 depending on when they were designed. So if you want the MZ72-HB0 to support Milan 7003 processors, you need revision 3.0, which we have today.
As with many server-focused motherboards, even in more 'standard' form factors, the GIGABYTE MZ72-HB0 focuses mainly on functionality and substance over style. GIGABYTE has opted for its typical blue-colored PCB, with the same theme stretching to the sixteen memory slots on the board. Looking at memory support, the MZ72-HB0 supports up to 2 TB per socket, in eight-channel memory mode, focusing on memory up to DDR4-3200 RDIMM, LRDIMM, and 3DS varieties all supported. As this is a dual-socket EPYC motherboard, there are two SP3 sockets with four horizontally mounted memory slots on either side, and each socket can house processors up to 280 W TDP.
Looking at connectivity, the MZ72-HB0 has five full-length PCIe 4.0 slots, with three of them supporting the full PCIe 4.0 x16 bandwidth, while the others are x8 but still full length. In order to balance the load on each CPU, three of the slots are controlled by the left CPU looking at the layout above, with the other two being controlled from the right CPU. More detail on this is on the following page where we analyze the topology of the motherboard.
On the rear panel is a basic selection of inputs, with two USB 3.0 Type-A ports, as well as a D-Sub and Gigabit Management LAN port which allow access to the BMC, which is controlled by a commonly used ASPEED AST2600 controller. Networking connectivity consists of two 10 GbE ports, while storage options are aplenty. These options include one physical PCIe 4.0 x4 M.2 slot, with two NVMe SlimSAS 4i ports, and three SlimSAS ports capable of supporting up to twelve SATA ports, or three PCIe 4.0 x4 NVMe based drives. For conventional SATA storage, the GIGABYTE has four SATA slots.
Touching on the performance, it's no surprise that the MZ72-HB0 takes a long time to boot into Windows - it took us just over two and a half minutes from powering the system onto loading into the OS. It takes this long from a cold boot as a system takes time to initialize the networking controller, the BMC, and other critical elements to make itself ready for POST. In terms of power, we measured a peak power draw at full load with dual 280 W processors of 782 W. In our DPC latency testing, the GIGABYTE didn't score that well, but that is usually par for the course with server motherboards with BMC interfaces.
For our up-to-date CPU performance numbers with this board, we tested numerous dual-socket EPYC 7003 configurations on this board, please check out the link below:
In this particular market space, there's plenty of dedicated 1U server options capable of supporting one or two EPYC 7003 processors, as well as the custom market. ASUS, ASRock Rack, GIGABYTE Server and others have options to suit all manners of configurations, but there are few dual-socket options in more standard form factors like the E-ATX GIGABYTE MZ72-HB0. That makes the MZ72-HB0 interesting, as it's clear GIGABYTE Server has risen to the challenge of fitting two large SP3 sockets and five full-length PCIe 4.0 slots, along with all the other controllers and connectivity to benefit from EPYC's large PCIe lane count. There are limitations due to the smaller E-ATX form factor including 16 versus 32 memory slots, and other PCIe slots to benefit from the full 128 lanes (only 88 are used in this system), but let's get into the review and see how the GIGABYTE MZ72-HB0 Rev 3.0 handles our benchmark suite.
Read on for our extended analysis.