ASRock B550 Steel Legend

The Steel Legend series of motherboards has been around for a couple of generations now, focusing more on an aesthetic more towards white and greys, as if the motherboards themselves were using stainless steel on the heatsinks. The B550 Steel Legend in this case uses heatsinks on the power delivery but they do not have a heatpipe at this price point, but we do get some extended M.2 armor from the chipset. The motherboard PCB looks very busy in this styling.

There is some RGB LEDs, on the rear panel cover and on the chipset, and there are two RGB headers on the board in the top right and bottom middle. The socket area has access to five 4-pin headers in easy reach, and like the B550 Taichi, we have four DDR4 slots with single sided latches.

On the right hand side of the board is a USB 3.0 header, a Type-C header, six SATA ports from the chipset, and a two-digit debug. On the bottom there are more fan headers, two USB 2.0 headers, and pads where power/reset buttons should be, perhaps on a different variant of this motherboard.

The B550 Steel Legend only has a single main PCIe 4.0 x16 slot from the CPU, with additional reinforcement, and there is an additional PCIe 3.0 x4 slot from the chipset. The audio for this board is beefed up, with the Realtek ALC1220 codec being paired with an NE5532 amp. The M.2 slots on this board are for one PCIe 4.0 x4 drive and one PCIe 3.0 x2 drive – there is an additional M.2 Wi-Fi slot in the middle.

From left to right, on the rear panel we get a DisplayPort, HDMI, a combination PS/2 port, two USB 3.2 Gen 1 ports in blue, four USB 2.0 ports, a Type-A USB 3.2 Gen 2 port, a Type-C USB 3.2 Gen 2 port, a Realtek RTL8125BG 2.5 gigabit Ethernet port, spaces for the Wi-Fi antenna, and the audio jacks.

ASRock B550 Taichi ASRock B550M Steel Legend
Comments Locked

101 Comments

View All Comments

  • Savikid - Tuesday, August 25, 2020 - link

    But the new oculus stuff only uses 1 usb port, so that right there is a drop. I use 2 for keyboard and mouse, one for a wireless controller, and one for my HMD.
  • Gigaplex - Tuesday, June 16, 2020 - link

    "On that one I added a USB PCI card to get enough ports."

    That's not really helpful to the user who said they can't add in a card on their mITX system.
  • eye4bear - Wednesday, July 1, 2020 - link

    Must be nice to have no external hard-drives, I have 3 all needing their own USB 3 port, along with a Logitech dongle that runs both my mouse and keyboard, finally a Bluethooth dongle as my computer has none built-in. Yes I would need 6 USB ports (one open for USB sticks) just to keep even.
  • consolessuck - Friday, November 6, 2020 - link

    No, I have 3 usb ports on my laptop and i only use 1 for my mouse. As it turns out, the most amount of usb ports i use at once is two when i am making a wired data transfer with my mouse plugged in. Actually, I almost never transfer data to my phone with a wire, instead just sharing them via bluetooth. and considering i never make large data transfers to my phone, this works out just fine. as for a desktop, however, i'd like a minimum of 3 as i'll always have not only a mouse, but a keyboard plugged in all the time.
  • taz-nz - Thursday, June 18, 2020 - link

    The Asrock B550M Steel Legend has 8 port on the back:
    4x USB-A 3.1 ports
    1x USB-A 3.2 port
    1x USB-C 3.2 port
    2x USB-A 2.0 ports

    And you still have two USB 2.0 internal header, plus two USB 3.1 internal headers.
    So that allows you to have another
    4x USB-A 3.1
    4x USB-A 2.0 ports.

    so that's 16 Ports
    Now if you like me and need Internal USB 3.2 USB-C header, you can use the PCIe 3.0 x2 m.2 slot to add one of these:
    https://www.delock.de/produkte/S_63998/merkmale.ht...

    or if you want two more USB 3.1 internal header you could add one of these:
    https://www.delock.de/produkte/G_62843/merkmale.ht...

    So if you can live without a second m.2 slot you have four more USB-A 3.0 ports.
    That gives you 20 USB ports without giving up a PCIe slot.
  • taz-nz - Thursday, June 18, 2020 - link

    oops, just noticed you said mITX not mATX
  • desii - Tuesday, June 16, 2020 - link

    Do any of these motherboards support ECC RAM (either buffered or unbuffered)?
  • drSeehas - Wednesday, June 17, 2020 - link

    Socket AM4 CPUs support only unbuffered RAM.
  • PixyMisa - Wednesday, June 17, 2020 - link

    I did a quick look on ASRock's site, since they're pretty good on ECC support, and every B550 board I checked lists ECC as supported.
  • Samus - Tuesday, June 16, 2020 - link

    I think AMD screwed up here with pricing their platforms appropriately. I understand the push for PCIe 4 but they can't have average motherboard prices hovering between $200-$300. There has to be $100 motherboards to be taken seriously especially by OEM's if they want 4000 parts to become mainstream.

    But maybe they don't...maybe they plan to milk the 3000 parts for a few years. After all, there isn't much reason not too. They have no competition from Intel in the budget segment right now.

Log in

Don't have an account? Sign up now