3-Way Low Profile CPU Cooling Shoot-Out: Reeven, Phanteks, & Noctuaby E. Fylladitakis on January 18, 2017 8:00 AM EST
- Posted in
The Reeven Steropes RC-1206b
Reeven supplies the Steropes inside a dark cardboard box, with the aesthetic design following the black/gold theme of the brand. The box is small, but it is a lightweight cooler that is very well packed inside the box, so shipping protection is more than sufficient. The bundle accompanying the Steropes is Spartan, comprised only by a black and white leaflet with installation instructions, the necessary mounting hardware and a single dose of thermal compound.
The Steropes is a horizontal cooler that has been designed to offer the best possible performance within a height of only 60 mm, offering maximum compatibility where size is a major consideration. With Reeven strongly advertising its socket AM1 compatibility, the Steropes appears to have been designed so that it could be a performance choice for very compact ITX/mATX systems, not to compete with its more sizable counterparts. Due to its shape and design, the Steropes is wider than the CPU socket area of small motherboards, but the fins are (just barely) high enough to allow for the installation of standard height RAM modules beneath it.
The fin array is relatively dense but the fins are narrow, a fitting choice since the goal of a heatsink is to maximize the surface area for heat dissipation. The fins are thin and flimsy but, for aesthetic purposes more than mechanical cohesion, the designer added a much thicker fin at the beginning of the array with the company logo punched on it. In order to further reduce the size of the cooler, Reeven is using a low profile 120 mm fan as well.
For a little extra performance, the base of the heatsink resembles a small heatsink all by itself. Considering how narrow the cooler is, airflow from the fan will certainly find its way down to the heatsink on the base of the cooler and should assist with thermal dissipation, even if only barely. Five heatpipes exit the small base of the cooler, with the three of them expanding towards both sides of the base, concurrently reaching into the fin array from the side and from the bottom.
A close inspection of the base reveals that only the heatpipes and the plate that makes contact with the processor are made out of nickel-plated copper. The rest of the Steropes, including the small heatsink on its base, is aluminum. The base of the cooler is very well made, finished down to a well-polished surface.
Post Your CommentPlease log in or sign up to comment.
View All Comments
StevoLincolnite - Wednesday, January 18, 2017 - link<3 Noctua.
Samus - Wednesday, January 18, 2017 - linkThe Noctua, although taller, has the best design. Inverting the fan is pretty smart.
StevoLincolnite - Wednesday, January 18, 2017 - linkThey also tend to be more expensive. But the cost is worth it in my opinion.
nagi603 - Thursday, January 19, 2017 - linkYes, they actually do provide far better workmanship and package. First Noctua I bought after Scythe blew me away, though it did cost twice the money.
nathanddrews - Wednesday, January 18, 2017 - linkGreat timing, AT! I was just looking at some low profile HSF solutions for a SFF AMD ITX system I have kicking around. The case I'm using has about 70mm clearance IIRC, so I was looking at the Noctua NH-L9a, but I'll have to see if the other dimensions of the Reeven will work in that space.
80-wattHamster - Wednesday, January 18, 2017 - linkCryorig's C7 is a good ~100W option as well, speaking as an owner of one. The fan it shipped with did have some PWM noise, but Cryorig's CS was helpful and sent a replacement (which is flawless so far) with minimal fuss.
wolfemane - Wednesday, January 18, 2017 - linkI've currently got a c7 in my Node 202 build cooling a 6600k. It barely does the job and after two replacement fans, I've finally given up on the fan side. I still use the base but I've custom mounted a 120mm sp fan to it and have seen much better temps. But still not that great. The L9i could t cut it either, which I had on prior to the c7. I've got a scythe big shuriken rev. B on the way to try out.
80-wattHamster - Wednesday, January 18, 2017 - linkA 6600K with an overclock definitely pushes a C7 pretty hard. It keeps mine under control at 4.0, though stress testing does start to push the thermal limit.
nathanddrews - Thursday, January 19, 2017 - linkYou guys talking about the AMD A8-6600K or the Intel i5-6600K?
80-wattHamster - Thursday, January 19, 2017 - linkGood question! Intel in my case.